Triad Felon Oversize Stunt Scooter Bar

Product Description

Triad Felon Oversize Scooter Bars
The Triad Felon Bars are built for durability and strength, making them an ideal choice for riders who demand toughness in their scooter setup. Designed with double-butting technology to reduce weight without compromising strength, these bars can withstand high-impact riding while maintaining lightweight performance.

Key Features:

Material: Constructed from superior heat-treated 4130 chromoly steel for maximum durability.
Dimensions: 710mm (28") in height and 610mm (24") in width, providing excellent control for tricks and stunts.
Weight: 1.1kg (38.8oz), making them one of the lighter steel T-bars available.
Design: Features forged gussets welded to the underside for added support in high-stress areas.
Customization: Laser-etched bar cut lines make modifying the size of the bars easy.

Available in multiple colorways including Matte Carbon Raw, Transparent Red, Transparent Blue, and Black, these bars offer a stylish look while delivering unmatched performance. Whether you are hitting the streets or the park, the Triad Felon Bars provide the strength and control needed for high-level scootering.

DELIVERY & RETURNS

Shipping and Returns

Free Shipping

If you buy for more than €90 in our webshop you'll get free shipping. Orders €39 → €90 Shipping fee €5.95.
Read more.

Fast delivery

Shipping time: 4-8 weekdays.
Read more.

365 days return

365 days right of return If you order online at EuroSkateshop you always have 365 days right of return.

Free exchange

We offer free return shipping if you want to exchange for a different size or colour. Simply order the desired product on the website and include the new order confirmation in the return parcel. Read more.

Specification

More Information
Bar shape	T
Bar design	One piece
Compatible with	SCS
Bar Inner diameter	32 mm (1.26")
Bar material	Chromoly 4130
Outer diameter	35 mm (Oversized) (1.37")
SCS ready	Yes
SKU	0102128532156-vconf
Enable Qty Increments (B2B)	No
Taxcode	9503.0010.00 \| Kick Scooters

Sizeguide

When you're looking for a bar for your scooter, you should pay attention to which compression system the bar is compatible with. In addition, the bar's diameter should also match the fork and clamp on your scooter.

There are also many different sizes of scooter bars. Some prefer tall and narrow bars, while others prefer low and wide bars - but all of this is a matter of taste, to be assessed by the individual rider.
Most bars for stunt scooters are made of chromed steel, which is the strongest material. Other stunt scooter bars are made of aluminum, which is also a relatively strong material and does not weigh much.

Recommended bar height

Rider height	Bar height	Age
128 -140 cm	482-533 mm	7-9 Year
140 - 156 cm	533 - 584 mm	10-13 Year
156 - 171 cm	560 - 660 mm	12-15 Year
171 - and up after	660 mm	14 Year and up after

Compression systems

When it comes to scooter bars, it's important to understand compression systems to know which bar to use for which scooter. You can read about the three different compression systems below. On all scooters on our website, it will be stated which system is suitable for the specific scooter. For more info, check out our scooter bar guide here!

ICS (Inverted Compression System):

ICS is a compression system often used in trick scooters. It involves a compression bolt that extends through the centre of the handlebar and screws into a star nut installed inside the fork tube.
With ICS, the handlebar must have an incision (cut) in the bottom to allow the compression bolt to pass through and make contact with the star nut.
This system is known for its simplicity and efficiency, but requires handlebar grips specifically designed for ICS compatibility.

ISC (Internal Compression System):

ISC is another compression system used in trick scooters, similar to ICS but with a different compression method.
In ISC, the compression bolt passes through the top of the fork tube and screws into a star nut or compression cap installed inside the fork tube.
Handlebar grips for ISC compatibility typically do not require a cut as the compression bolt does not extend through the centre of the handlebar.

IHC (Integrated Headset Compression):

IHC is a compression system that integrates the compression mechanism with the headset bearings of the scooter.
With IHC, the compression bolt screws directly into the top of the fork tube, eliminating the need for a star nut or compression cap inside the fork tube.
Steering levers compatible with IHC do not require a cut as the compression bolt does not extend through the centre of the handlebar.
Each of these compression systems has its benefits and considerations, and the choice between them often comes down to personal preference, compatibility with the scooter's components and desired setup of the scooter. Riders should ensure compatibility between the handlebars and the compression system when assembling or upgrading their trick scooter.